When Eddie Andrews joined 3T-AM in November 2021, the Newbury manufacturer could already make a one-off metal component for hundreds of customers. The harder problem was winning the order to make the same component again, at the agreed price and on schedule. Andrews summed up the challenge by asking how the company could make that work “boring” — how it could turn additive manufacturing into general production rather than a sequence of unique jobs.
Five years later, the order book tells part of the story. Repeat production now accounts for around 70% of 3T-AM’s revenue, while new product introduction still takes up roughly 80% of the team’s time. That split is the central tension in the company’s move from prototypes to production: repeat orders pay for capacity, but development work remains the route to future programmes.
Two clocks in the business
The demand mix has shifted. Semiconductor customers generate the strongest demand, followed by energy, then space and defence. Aerospace remains central to 3T-AM’s plans, but the company has found work for its machines while it waits for more aerospace programmes to reach suppliers at volume.
The commercial transition was not a straight line. Production orders rose and then tapered off. Turning away too much prototype work during the upswing would have left gaps when it eased. Repeat orders now give 3T-AM room to choose which development jobs to take, even though some will never become production contracts. As Andrews put it, if a manufacturer does not take part in the journey, it will never find out what a development job could become.
The operational reset that began in 2021 was as much about process discipline as equipment. Years of accommodating individual prototype jobs had created process after process on the shop floor. 3T-AM narrowed its customer base, gave larger accounts more influence over what it developed and simplified accumulated procedures. Much of the work remained manual while the team established which operations it could reliably repeat.
Owning the finished part
Changing who took charge of a job mattered as much as changing machines. Previously, the first person to see a drawing was the engineer responsible for printing it, so the natural question was “how am I going to print it?” Decisions at that point shaped the work handed to everyone else. Today a product owner is responsible for delivering the finished component, and print and machining specialists agree what condition the part should be in as it passes from one operation to the next.
The same logic runs through 3T-AM’s decision to bring machining in-house. Andrews argues that becoming a successful additive manufacturer requires being a really good CNC machining company. In-house machining gave the SME more control over costs, quality and delivery dates. Larger multi-laser machines improved productivity at the printing stage. Neither investment on its own, however, could tell a customer when a finished part would arrive.
The approach is not a guarantee of scale. It is an attempt to make production repeatable by assigning responsibility for the finished part and by defining the handover conditions between printing and machining. For customers, the relevant question is less whether a part is printed than whether the complete route can be quoted, scheduled and repeated.
Buying machines against demand
Austrian precision manufacturing group SBO acquired 3T-AM in October 2025. The Newbury business had generated around £5 million in sales in 2024. SBO brought experience in machining downhole drilling equipment, including components up to ten metres long, according to Andrews. What interested the group was 3T-AM’s metal printing expertise and access to a different set of industrial customers.
SBO approved 3T-AM’s five-year business plan, and Andrews recalled the board asking whether the company could do it quicker. In August 2026, the group reported that 3T-AM had added an EOS M400 in the second quarter, ordered another printer and invested further in post-processing. Those purchases formed part of a seven-printer expansion across the UK and US operations.
The investment pattern has changed. Previously, 3T-AM might have bought an M400 to try a different material and see what business it could develop. Today, Andrews says, customers’ programmes account for the capacity of incoming machines before they reach the factory. A full order book makes the next machine easier to justify, but it also leaves little time on that machine to qualify a different material or develop a new product. Andrews wants to preserve two distinct reasons to invest: contracted demand and the work 3T-AM cannot yet offer.
The scale of some production commitments explains why. Before the pandemic, 3T-AM saw an aerospace enquiry in which a single family of parts would have required 16 multi-laser systems to cover only a share of the requirement. From the buyer’s side, the question was how many suppliers had the floor space, the capital and the capacity to take it on. Andrews sees that as one reason original equipment manufacturers still keep sizeable additive programmes in-house.
What the customer can measure
For some customers, replacing a casting with a printed part earns its keep through lead time alone. A legacy or development programme can obtain a component sooner, even at much the same unit cost. At higher volumes the calculation gets tougher. Machine maintenance contracts and consumables weigh on the hourly rate, and a factory working a single shift has fewer productive hours over which to spread those costs. Andrews sees scope to learn from CNC shops that operate around the clock. One place he would look for automation is support removal, where the process can still depend on what an experienced operator knows about a particular job.
A project with Honeywell Aerospace will put another claim for additive manufacturing to the test. Under an Aerospace Technology Institute-funded programme, the partners are converting an existing conventionally manufactured component to additive. The sustainability team at the NCC in Bristol is carrying out a 12-month life-cycle assessment covering manufacture, service and end of life. Printing closer to the finished shape should use less feedstock and leave less metal to machine away than starting with billet. The study will compare the two manufacturing routes alongside any benefit the redesigned component delivers in service.
The intended outcome in Newbury is something a purchasing department could use. As 3T-AM connects its factory and enterprise systems, it is developing digital product passports to document the carbon associated with making an individual component. By the end of 2028, Andrews wants that information to come with every part at no extra charge. For a customer compiling a supply-chain emissions report, it would become one more thing they could expect from a routine order.
The broader lesson is that the move from prototypes to production is not a single technology purchase. It depends on an order book that can support capacity, process ownership across printing and machining, and measures that customers can compare. 3T-AM’s 70% production share gives it more room to choose development work, but the company still relies on that work to find the next programme. The LCA and digital passports are planned or under way, not settled outcomes. The production model will be tested by whether repeat orders can absorb those costs while meeting delivery, quality and increasingly documented sustainability requirements.
